Electric Heater Explained In Fewer Than 140 Characters

How to Select Electric Heaters

Electric heaters come with a host of advantages, including low initial costs, minimal maintenance by the homeowner and efficient heating. They're also more convenient than heating systems that require venting.

You can save money on heating costs when you have an electricity provider that offers Economy 7.

Temperature Settings

Ideally, your electric heater will allow you to set the temperature you want, and then keep that temperature constant without having to switch it on and off. This will decrease energy use and help you avoid entering an area that's too cold or leaving one that's too hot. Find a thermostat with the ability to set a timer, should it be available.

When you are choosing an electric heater, be sure it is rated for the space you have. A heater that's too small will need to run longer to achieve the temperature you want. This wastes energy and could cause your space to overheat. Use our calculator to determine the optimal heater's power in watts per square foot for your area.

Also, ensure that the knobs that regulate temperature are easy to adjust and reach. You may need to take off screws or peel back insulation to reach the knobs if they are recessed.  electric fireplaces and stoves  could be a challenge. Make sure you are using the recommended temperature range for safety and efficiency. Temperatures that are lower than 120 degrees can trigger bacteria growth and increase the risk of scalding, while temperatures that exceed 140 degrees could pose an hazard to fire.

The Everhot is a beautiful compact heater that can be put to use in conservatories, or as the company says: "annexes... narrow boats... shepherds' huts... Glamping pods." It reaches up to 200C, which makes it a decent option for cooking as well as heating. It has a timer and an ECO mode, which optimizes heat and power settings to be more energy-efficient.

It's also extremely quiet. There isn't any fan noise or whirring sound when changing the settings. This makes it a great option for bedrooms and living rooms. It also has a few other useful features, such as a built-in nightlight which glows blue when the heater is turned on and a built-in humidifier which can be switched to intermittent mist mode for a more subtle effect.  electric wood burning stove  is also sturdy and safe with a tip-over shutoff switch, as well as an overheating protection which automatically shuts the unit off when it is overheated. It's also certified by UL for safety.

Safety

Electric heaters are to be used with caution. The dangers of fire from heaters and carbon monoxide (CO) poisoning are especially dangerous to people with a disability, elderly or those suffering from chronic health issues or immune system disorders. Children and pets can knock over a heater, leading to injury or death.

ESFI suggests that you inspect the plug and cord of your heater regularly. Check for signs of damage such as a cracked plug, a loose cord or if the plug is cracked or loose. If the cord or outlet is hot, call an electrician who is certified to replace it. Also, never connect multiple electrical devices to the same outlet, including a space heater; it could cause overload and cause overheating.

It is a good idea to select heaters that are listed or labelled by a nationally recognized testing laboratory, such as UL. These heaters are more likely to be in compliance with the safety standards of voluntary manufacturers. Also, don't place a heater on easily flame-prone surfaces, such as rugs and fabrics. Keep at least a three-foot space between the heater and any combustible materials. Also, do not place a heater near the bathroom or in the kitchen. Do not touch it if you are wet.

Also, always plug in the heater directly to an outlet on the wall. Never use an extension cord. If you need to use an extension cord, make sure you choose the shortest possible heavy-duty one that is made of 14 gauge wire. Examine any outlets that are sagging because this could be a sign of a circuit that is overloaded.

Keep the electric space heater at least six inches away from anything that could ignite. Place the heater on an unburnable, flat surface, not on furniture, cabinets or tables, which may overheat. Also, make sure to turn off and unplug the heater when you leave the room or retire to bed as it increases the risk of fire.

Making sure you are taking the appropriate safety precautions when using electric heaters can help to avoid injuries and cut down on energy consumption. As temperatures drop, facility managers frequently use electric heaters to provide warmth in office spaces and common areas. Preferred Climate Solutions can install and service indoor or outdoor electric heaters to make your facility as comfortable as is possible during these cold winter months. Contact us to learn more about heating solutions.

Energy Efficiency

When choosing a portable electric heater take into consideration its energy efficiency. This is the amount of energy needed to achieve the desired output. Heaters that use less electricity are thought to be more efficient, and this will help lower the overall cost of heating your home or business.

The heating element is utilized in a majority of electrical heaters to convert electrical energy into warmth. It is usually made of a ribbon or coil, a flexible heater, or tubular element that emits heat when a current flows through it. The amount of heat generated is dependent on the type and method of heating element (convection, radiation).

If you're concerned about the effect on the environment, choose a model which uses eco-friendly energy sources. This could be a renewable energy source or alternative to fossil fuels like wind or solar.

The energy efficiency of an electric heater is also dependent on where the electricity comes from and how it is generated. Electricity derived from a solar or wind power plant will be more efficient than electricity generated by burning fossil fuels at a power station.

You should not only choose a heater that is an environmentally friendly energy source, but one that comes with many energy-saving features. This could include automatic shut-off mechanisms in case of overheating or if the unit is accidentally tipped over.

These safety measures can be helpful to protect your family or employees and they could also help reduce your energy costs by assisting you in avoiding excess usage. A majority of portable electric heaters operate quietly, making them ideal for bedrooms, offices and other areas that require a calm environment.

Electric heaters can save you money by reducing maintenance calls. Gas heaters are more expensive to fix than electric models and the cost of maintenance can add up over time. Electric models are typically less expensive to maintain and often come with more advanced features to help you save money.

Installation

Electric heaters rely on the Joule principle that converts electrical energy into radiant warmth that warms a space. Electric heaters are also more efficient and economical than other heating methods, particularly gas. However, they aren't suitable for every home and could put stress on an existing electricity system. Therefore, it's best to have an expert electrician verify that the current system is able to handle the additional demand of an electric wall heater before installing one.

When selecting an electric heater, you must consider a variety of factors, including the size and type of the heater as well as the space in which it will be placed. The type of heater you select will determine how much it will cost to operate. A baseboard heater that is electric can cost more to run than a space heater or a portable heater, but it offers more uniform warmth and doesn't require any vents or chimneys.

Electric fan heaters include an air compressor that circulates hot air through the room. This kind of heater is usually the cheapest to run, but it can be noisy and take longer to heat the room than other types of electric heaters.

Look for an electric space heater that has an integrated thermostat. This feature lets you to set a temperature and the heater shuts off automatically when it reaches the desired temperature. This feature can reduce the energy use and also save you from having to keep turning the heater on and of.

Before you attempt to install an electric heater, ensure that the power is off at the breaker panel. Also, ensure that the circuit is turned off by using a tester. Then, mark the spot in which you plan to install the electric heater on the wall and cut an opening in the drywall. Use a drywall saw to remove the necessary section, being careful not to cut any electrical wires or pipes.

Run a 14/2 cable that is the same gauge as the wires that are already in use from the breaker panel to the wall opening. Connect each wire to the screw available in the outlet box by removing approximately 1 inch of insulation. Identify this wire as the "line" by labeling it or marking it with a piece of red tape. Then, connect it to the wire leads marked "load" in the thermostat box.